ERR33-C. Detect and handle errors

Many functions will either return a valid value or a value of the correct return type that indicates an error (for example, -1 or a null pointer). Assuming that all calls to such functions will succeed and failing to check the return value for an indication of an error is a dangerous practice that may lead to unexpected or undefined behavior when an error occurs. Therefore, it is essential that programs detect and appropriately handle all errors in accordance with an error handling policy as discussed in ERR00-C. Adopt and implement a consistent and comprehensive error-handling policy.

Noncompliant Code Example (setlocale())

In the noncompliant example below, the function utf8_to_ucs() attempts to convert a sequence of UTF-8 characters to UCS. It first invokes setlocale() to set the global locale to "en_US.UTF-8" but it fails to check for failure. setlocale() will fail by returning a null pointer, for example when the locale is not installed (the function may fail for other reasons as well, such as the lack of resources). Depending on the sequence of characters pointed to by utf8 the subsequent call to mbstowcs() may fail or result in the function storing an unexpected sequence of wide characters in the supplied buffer ucs.

size_t utf8_to_ucs(wchar_t *ucs, size_t n, const char *utf8) {
  setlocale(LC_CTYPE, "en_US.UTF-8");
  return mbstowcs(ucs, utf8, n);
}

Compliant Solution (setlocale())

A compliant solution checks the value returned by setlocale() and avoids calling mbstowcs() if the function fails. The function also takes care to restore the locale to its initial setting before returning control to the caller.

size_t utf8_to_ucs(wchar_t *ucs, size_t n, const char *utf8) {
  const char *save;
  save = setlocale(LC_CTYPE, "en_US.UTF-8");
  if (NULL == save) {
    /* Propagate error to caller */
    return (size_t)-1;
  }

  n = mbstowcs(ucs, utf8, n);
  if (NULL == setlocale(LC_CTYPE, save))
    n = -1;

  return n;
}

Noncompliant Code Example (signal())

In the noncompliant example below the function signal() is invoked to install a handler for the SIGINT signal. signal() returns a pointer to the previously installed handler on success and the value SIG_ERR on failure. However, since the caller fails to check for errors, when signal() fails the function may proceed with the lengthy computation without the ability to interrupt it.

volatile sig_atomic_t interrupted;

void handle_interrupt(int signo) {
  interrupted = 1;
}

int f() {
  int result = 0;

  signal(SIGINT, handle_interrupt);

  while (0 == result && 0 == interrupted) {
    /* Perform a lengthy computation */
  }

  /* Indicate success or failure */
  return interrupted ? -1 : result;
}

Compliant Solution (signal())

A compliant solution checks the value returned by the signal() function and avoids performing the lengthy computation when signal() fails. The calling function also takes care to restore the disposition for the SIGINT signal to its initial setting before returning control to the caller.

volatile sig_atomic_t interrupted;

void handle_interrupt(int signo) {
  interrupted = 1;
}

int f() {
  int result = 0;
  void (*saved_handler)(int);
  saved_handler = signal(SIGINT, handle_interrupt);

  if (SIG_ERR == saved_handler) {
    /* Indicate failure */
    return -1;
  }

  while (0 == result && 0 == interrupted) {
    /* Perform a lengthy computation */
  }

  if (SIG_ERR == signal(SIGINT, saved_handler))
    return -1;

  /* Indicate success or failure */
  return interrupted ? -1 : result;
}

Noncompliant Code Example (malloc())

In this noncompliant code example, input_string is copied into dynamically allocated memory referenced by str. However, the result of malloc() is not checked before str is referenced. Consequently, if malloc() fails, the program has undefined behavior (see undefined behavior 103 in Annex J). In practice, this typically leads to an abnormal termination of the process, thusproviding an opportunity for a denial-of-service attack. In some cases it may be the source of other vulnerabilities as well (see the #Related Vulnerabilities section).

See also MEM32-C. Detect and handle memory allocation errors.

void f(char *input_string) {
  size_t size = strlen(input_string) + 1;
  char *str = (char *)malloc(size);
  strcpy(str, input_string);
  /* ... */
}

Compliant Solution (malloc())

The malloc() function as well as the other memory allocation functions, returns either a null pointer or a pointer to the allocated space. Always test the returned pointer to ensure it is not NULL before referencing the pointer. Handle the error condition appropriately when the returned pointer is NULL. When recovery from the allocation failure isn't possible, propagate the failure to the caller.

int f(char *input_string) {
  size_t size = strlen(input_string) + 1;
  char *str = (char *)malloc(size);
  if (str == NULL) {
    /* Handle allocation failure and return error status */
    return -1;
  }
  strcpy(str, input_string);
  /* ... */
  free(str);
  return 0;
}

Risk Assessment

Failing to detect error conditions can lead to unpredictable results, including abnormal program termination and denial-of-service attacks or, in some situations, could even allow an attacker to run arbitrary code.

Related Coding Practices

Other Languages

This rule appears in the C++ Secure Coding Standard as ERR10-CPP. Check for error conditions.

Bibliography

[CWE] CWE-252: Unchecked Return Value
[CWE] CWE-253: Incorrect Check of Function Return Value
[CWE] CWE-390: Detection of Error Condition Without Action
[CWE] CWE-391: Unchecked Error Condition
[DHS 06]. Handle All Errors Safely.
[Henricson 97] Recommendation 12.1 Check for all errors reported from functions

      12. Error Handling (ERR)      13. Application Programming Interfaces (API)